Electrotechnical Institute - Wroclaw

Electrotechnical Institute Division of Electrotechnology
and Materials Science

M. Sklodowskiej-Curie 55/61
50-369 Wroclaw, POLAND

phone (+48) 71 328 30 61
fax. (+48) 71 328 25 51

ielow@iel.wroc.pl

Home page » Accredited laboratory

Accredited laboratory

Test laboratory of the Electrotechnical Institute
in Wrocław


is accredited by the Polish Accreditation Center
 
Accreditation Certificate Nr AB 067





The list of accredited tests:

 

Type of activity/ properties tested/ method

Reference documents

 

a)   Dynamic magnetization curve

b)   Real power loss index

c) relative permittivity (amplitude)

PN-EN 60404-2:2003/A1:2008

PN-EN 60404-4:2003/A2:2009

PN-EN 10280+A1:2007

PN-EN 10107:2014-06

PN-EN 10106:2016-01

 

Fire Hazard Method

The method of glowing wire:

-          The time of inflammation and extinguishment.

-          Height of flame.

-          Ignition of cotton pad

PN-EN 60695-2-11:2015-02

PN-EN 60695-2-12:2011

PN-EN 60695-2-12:2011/A1:2014-10

PN-EN 60695-2-10:2013-12

 

Minimum oxygen concentration needed to support fire

PN-EN ISO 4589-2:2006+A1:2006

PN-EN ISO 4589-1:2011

 

Resistance to vertical spreading of flame: Fire hazard with mixture flame 1 kW.

- Range of charring of the coating

PN-EN 60332-1-1:2010

PN-EN 60332-1-1:2010/A1:2016-02

PN-EN 60332-1-2:2010

PN-EN 60332-1-2:2010/A1:2016-02

PN-EN 60332-2-2:2010

PN-EN 60695-11-2:2014-07

 

Fire hazard testing – Test flames – 50 W horizontal and vertical flame test methods.

- time of fire

- the time of glow

- inflammation of the cotton pad

PN-EN 60695-11-10:2014-02

 

Mechanical properties:

- proof strength (Rp)

- yield strength (Re)

- tensile strength (Rm)

- percentage elongation after fracture  (A)

- percentage reduction (Z)

Range: force up to 80 kN

Tensile testing at room temperature

PN-EN ISO 6892-1:2016-09

Determination of tensile, compressive and bending strength in the temperature range from 20 °C to +250 °C.

(Modulus of elasticity, compressive strength and break, upper and lower yield point, elongation at break and yield strength)

Force range:

tensile and compressive up to 80 kN, bending up to 10 kN

Ring stiffness

 

 

PN-EN ISO 604:2006

PN-EN 60684-2:2011

PN-EN ISO 527-1:2012

PN-EN ISO 527-2:2012

PN-EN ISO 527-3:1998

PN-EN ISO 527-4:2000

PN-EN ISO 527-5:2010

PN-EN ISO 178:2011

PN-ISO 37:2007+AC1:2008

PN-EN ISO 11296-4:2011

PN-EN 1393:2002

PN-EN 761:2001

PN-EN 1120:2001

PN-EN ISO 899-2:2005

PN-EN 13380:2004

PN-EN 1228:1999

PN-EN ISO 178:2011/A1:2013-06

Tensile and tensile strength before and after aging of wires and cables with outer shell and insulation outer diameter greater than 40 mm

PN-EN 60851-3:2009

PN-EN 60851-3:2009/A1:2014

PN-EN 60811-501:2012

PN-EN 60811-401:2012

Breakdown voltage under normal conditions and as a function of temperature, in the range (20 -180) °C, up to 25 kV      

PN-EN 60243-1:2013-12

PN-EN 60464-2:2006

PN-EN 60464-2:2006/A1:2008

PN-EN 60455-2:2002

PN-EN 60674-2:2002 +A1:2003

PN-EN 60684-2:2011

PN-EN 60454-2:2008

PN-EN 60851-5:2008

PN-EN 60851-5:2008/A1:2011

 

Resistance under normal conditions and as a function of temperature, in the range (20 -180)°C, up to 1015

 

 

 

 

 

IEC 60093:1980

IEC 60167:1964

PN EN 60464-2:2006, cl. 6.5.1

PN-EN 60464-2:2006/A1:2008

PN EN 60455-2: 2016

PN-EN 60684-2:2011 cl. 21, cl. 22

and cl. 23

PN-EN 60674-2:2002+ A1:2003

PN-EN 60454-2:2008

PN-EN 60851-5:2008

PN-EN 60851-5:2008/A1:2011

PN-E-04405:1988

PN-EN 50395:2007, cl. 5

PN-EN 50395:2007/A1:2011

PN-83/E-04160.70

Water absorption tests

 

PN-EN 60811-402:2012

Solar radiation resistance

Test Sa.: +40 0C or 55 0C

PN-EN 60068-2-5:2011

PN-EN ISO 4892-2:2013-06

Environmental testing

Temperature cyclic test

Temp. range: (-65 ÷ +200) 0C

Damp range: (10÷98)%

PN-EN 60068-2-38:2010

PN-EN 60068-2-30:2008

PN-EN 60068-2-2:2009

PN-EN 60068-2-33:2002

PN-EN 60068-2-14:2009

PN-EN 60068-2-1:2009

PN-EN 60068-2-78:2013-11

 

Electrical test methods for low voltage energy cables

(temp. 23 0C

temp range: –50 0C ÷ +300 0C,

Measurement range:

resistance - 10 Ω ÷ 1017 Ω,

resistivity - 10÷1019 Ω cm)

PN-88/E-04405

IEC 60093:1980

IEC 60167:1964

ASTM D 257-99

PN-EN 50395:2007, cl. 8

PN-83/E-04160/73

Electric strength of insulating materials with variable voltage

Range: 50 Hz – 120 kV

and direct to 170 kV

PN-EN 60243-2:2014-07

PN-K-92001:1997, cl. 2.7 and cl. 3.8

PN-EN 60243-1:2013-12

Torsion strength

PN-EN 60832-1: 2010, cl. 5.5.2, and cl.5.5.6

Tensile strength

PN-EN 60832-1: 2010, cl. 5.5.3

Flexural strength

PN-EN 60832-1: 2010, cl. 5.5.5

Electrical properties after

conditioning in water

PN-EN 60832-1: 2010, cl. 5.7.1

Resistance to solvents (only for

measuring rod)

PN-EN 60832-1: 2010, cl. 5.8.8.1

Attrition resistance (only for

measuring rod)

PN-EN 60832-1: 2010, cl. 5.8.8.2

Electrical strength after attrition resistance

PN-EN 60832-1: 2010, cl. 5.8.8.3

Linear dimensions

PB-5/LB/IEL/OTiME cl. 9.3,

rev. 5, 02.03.2011

Electrical strength for pliers

PB-5/LB/IEL/OTiME cl. 9.9,

rev. 5, 02.03.2011

Electrical tests

PN-EN 61111:2009 cl. 5.6.

Electrical tests for DC

and AC voltage

PN-EN 60903:2006 cl. 8.4

Electrical strength and leakage current

PB-13/LB/IEL/OTiME,

rev. 4, 06.05.2008

PN-EN 50321:2002

Threshold voltage

PN-EN 61243-1:2007 cl. 6.2.1.2

PN-EN 61243-1:2007/A1:2010

Work time

PN-EN 61243-1:2007 cl. 6.2.9

PN-EN 61243-1:2007/A1:2010

Bridging protection between indoor and outdoor voltage indicators

PN-EN 61243-1:2007 cl. 6.3.1

PN-EN 61243-1:2007/A1:2010

 

Bridging protection of overhead type voltage indicators

PN-EN 61243-1:2007 cl. 6.3.2

PN-EN 61243-1:2007/A1:2010

 

Resistance to sparks

PN-EN 61243-1:2007 cl. 6.3.3

Resistance to collapse

PN-EN 61243-1:2007 cl. 6.4.4

 

Impact strength

PN-EN 61243-1:2007 cl. 6.4.5

 

Resistance to climatic conditions

PN-EN 61243-1:2007 cl. 6.4.6

PN-EN 61243-1:2007/A1:2010

 

Durability of the markings

PN-EN 61243-1:2007 cl. 6.4.7

 

Study of the influence of interfering factors on clear signaling

PN-EN 61243-1:2007 cl. 6.2.1.3-5

PN-EN 61243-1:2007/A1:2010

 

We use cookies to provide you with a better user experience and for statistical purposes.
If you do not block cookies, you consent to use them and store them in the memory of your device.
© Copyright 2006 IEL/OW
Produkcja (2006) Impact Media.